Category Archives: Projects

Aviation, Projects

Back on track

Greetings Intrepid Aviators,

The last few days have been plagued with zombies; no seriously, take a look . Now that the zombie menace has been put down for the year, they will be back next year, it’s time to get back on track with the matter at hand, building an airplane.

Nothing new has been done on the 1:4 scale since last week, but I have had some thoughts on the matter. I think making the paper laminates in smaller sections rather than the 24” x 12” pieces I planned on, using thinned glue, and pressing the material with more weight should help make the resulting material a high quality substitute for very thin plywood. This week I am going to focus on the laminate first and then if all is going well I will get started milling the lumber materials from the Dough Fur I purchased last week.

VP-2Another task for this, and the next few weeks is to dive into the plans in much more detail. I have looked over both the VP-1 and VP-2 plans but I have not really focused on them in detail or thought about what assemblies to begin with. I am considering picking up a large drawing pad and redrawing the plans so that all of the details for a sub assembly will be presented on a single sheet. I like to study the details of drawings and plans by reproducing them by hand. The process helps create 3D models of each piece and assembly and how they interrelate with other parts. It gives me a clearer vision of the entire plane and all of its component parts. By redrawing the plans I will also be able to come up with a complete parts list, assembly parts lists, work operations list by assemblies, and other useful administrative minutia that should make the build go smoothly for me. A side benefit is taking the time to include the 1:4 scale dimensions in parenthesis alongside the full scale dimensions.

All of this may sound like it is complete over-kill, and it may be, but it’s how I work. I like to plot out all of the details and have contingencies for problematic areas. It comes from decades of working with non-profit groups and producing events. Even though I have been harassed mercilessly for taking so much time in planning to the smallest detail, everything works out smoothly even in the face of adversities most of the time. It is an attitude thing, too. When running an event, it is easy for panic and frustration to kick in when something starts to turn south, particularly during the event. It’s all about focusing on solving the problem at hand, removing the cause, and smoothing out the bumps. Oh, and doing it all behind the scenes without the general public knowing it happened at all. All in a day’s work as they say.

Blue skies and tailwinds,
~Jon

Aviation, Projects

Materials

Got out this morning and did another material sourcing run. It didn’t go as well as I had hopped, but that’s okay. I have made some solid decisions on materials and can now start buying what I need for the 1:4 scale project, as well as buying materials for the full scale airplane. Full steam ahead!

Full Scale

First and foremost, I’ve been able to source a majority of wood products locally. However, it looks as though I will have to run with one of the regular aviation suppliers for the 1/16″ plywood. I can find 1/4″ and 1/8″ but that’s as thin as local suppliers carry. 1/4″ AA marine is relatively easy to find, 1/8″ is tougher, 1/16″ is nearly impossible in any grade.

I found a local source for aircraft cables of the mechanical control variety; not electrical, which I suppose would be obvious to anyone who has been reading this blog since I don’t plan on installing an electrical system in the airplane. It looks like Orchard Supply carries aircraft cable as a regular item.

A local supplier for composite materials is TAP Plastics. I had a feeling it wouldn’t be particularly difficult getting some of the composite supplies locally. They don’t have all of the right fabrics, but they do have some. I am not sure about the resin and epoxy they stock, but for the basic materials to work with them, well those they have in spades. I will check out the chemical stuff later when I get to a point that I actually need to think about composites.

1:4 scale

I am rapidly coming to the conclusion that I will need to manufacture the ply products I need. The lumber is readily available, ply products on the other hand… With the full scale ply sizes being 1/4″, 1/8″, and 1/16″ the 1:4 sizes are 1/16″, 1/32″, and 1/64″ respectively. As I said earlier in this post, it is tough if not impossible to find ply this thin anywhere locally. So, I have resigned myself to the arduous task of manufacturing a replacement material.

At this point I think it will be a laminated paper product. Layers of a a heavy water-color paper should do nicely, maybe a 25 sheet pad. With any luck the end product will be moderately stiff ply-board in the appropriate thicknesses. In 1:4 scale a 4’x8′ sheet of plywood is only 1’x2′ so it shouldn’t be difficult to find the paper stock large enough. I was thinking of using Gorilla Glue as the laminating adhesive mainly because it is very strong and you can use water to thin it for spreading a very thin layer evenly across the surfaces of the laminates. I was hoping to avoid this but ya gotta do, what ya gotta do.

Composites

In truth the only composite parts that I would need to build are the engine cowling and the turtle-deck faring which isn’t even a required part, though, I must admit, I am definitely warming up to the idea.

The EAA Chapter 62 meeting I mentioned in the last post got me thinking about composite materials and processes. I haven’t done any fiberglass work in a long time but that is going to change with a day-job project that I recently started. It has some fiberglass work that needs to be done, so I figured I could brush up on those skills and maybe put some of the new techniques into action.

I purchased a book on fiberglass repair and construction to refresh the old gray matter on the subject. It has nothing to do with aviation but it is all about the basic skills for fabrication and repair in the medium. The book was published in 1988 so some things might be a little different or out of date material-wise, but the skills should transfer reasonably well.

Till next time, blue skies and tail winds,
~FlyBoyJon

Aviation, Projects

Aircraft Grade

Greetings Aeronauts,

This week has been interesting. In Monday’s post I talked about getting a copy of the VP-2 plans and the idea of building both the VP-1 and the VP-2 in 1:4 scale to compare the plans. Looks like I will begin working on an airframe sometime next week. I am really looking forward to start actually building. This weekend is jammed with Grave Mistake workshops and the Step Out: Walk to fight diabetes 5k that my wife and I participate in every year along with some friends.

Throughout the week I have been interacting with the great people in the Volksplane Yahoo Group and the fine folks at Oshkosh 365. I got several replies when I asked for some advice on adhesives for wood aircraft. The plans call for Aerolite which does not appear to be readily available. For the most part I got a lot of thumbs up for T-88. Other suggestions included, Aerodux which is a Resorcinol Formaldehyde Adhesive like Cascophen, and West System Epoxy. I am not sure which one I will go with but I am leaning toward the T-88. I need to get the MSDS for each of them as well as take a look at volume, weight, coverage, and relative strength comparisons, and yes, the cost comparison, too.

Another question I had was about Certified Aircraft Grade Lumber. It looks like there ain’t no such animal. In short, your aircraft lumber supplier checks the material to make sure it meets the standards of Aircraft Grade, those standards being MIL-S-6073 Military Specification, Spruce, Aircraft, MIL-P-6070B Military Specification, Plywood and Veneer Aircraft Flat Panel, ANC-18 Design of Wood Aircraft Structures, and of course the standards set in AC-43.13 1B Maintenance & 2B Alterations Aircraft Inspection, Repair & Alterations. They inspect the material, stamp it, and price it accordingly. It is not a federally recognized certification, it is a voluntary compliance to Military Specifications set back when the military used wood aircraft, with a little updating now and then. Don’t take that to mean that I think it’s all hokum; I don’t. The standards are there because they are appropriate to the application. If you are not sure how to grade lumber or are not sure if you can determine compliance reliably, buy lumber from someone who can make those assurances!

While Sitka Spruce is the de facto aircraft lumber, it is not the only species used. The main factor in choosing wood other than structural strength is grain, vertical grain (VG) to be precise. A VG Clear Douglas Fir (DF) is one of the closest quality woods to Sitka Spruce, in fact it is stronger than the spruce in most respects. The drawback with DF is its weight; DF runs about 26% higher in weight than Sitka. In this aircraft, a majority of the structural weight is in the plywood and not the lumber, so the impact on gross weight using DF instead if Sitka should not be that much. Without an electrical system, using minimal instruments, and other weight saving details like single occupant controls, I think the trade-off in favor of structural strength is reasonable, even wise, not to mention that as a Pocket-Change Builder I can’t overlook the cost of DF being significantly lower than Sitka. Having a supplier less than 20 minutes away doesn’t hurt.

Most likely I will end up going with the VP-2 airframe. It is intended for a higher gross weight and a higher useful weight. With two occupants taking up 170 pounds each, that gives me 340 pounds to work with as a single pilot. While I won’t need all of that, I sure as heck am not under 200, nor have I been since 6th grade. I wrestled in the 220 class in Jr High. The extra airframe strength and the VP-2 load capacity provide a significant safety margin over the VP-1 design which is why I am leaning in that direction.

Something fun thing to add to this week was my first EAA Chapter meeting. There are two chapters here in San Jose with a couple of others less than an hour away giving me a lot to chose from as far as finding a good fit. Thursday night was Chapter 62’s monthly meeting. I am not sure if I am going to join 62 yet, but I did have a good time there. The chapter is more of a flying and activities chapter than a building chapter. As it turned out, last night was a great night for me to go to a meeting there because the speaker was Zeke Smith, author of Advanced Composite Techniques.

Zeke demonstrated his process for vacuum forming a leading edge to be used on an an ultralite project. The end product has a thin outer skin and foam strengthening with plenty of room for similarly light ribs. I was amazed at the strength of the leading edge without any support and the incredibly light weight. If I was working on a composite project I would be buying this book right now. I may still get it for this project to use his techniques to form the engine cowling and turtle deck of the VP. That might even give me more weight advantage for the DF…

Only slightly off topic, I can easily see myself building a composite VP-2. In fact I can see some of the layups for Zeke’s vacuum process in my head now. To quote Red Leader Stay on target.

For anyone interested in helping out the FlyBoy, I need to get a print copy of AC-43.13 1B/2B. Contributions to the Pocket-Change Builder’s Fund are always greatly appreciated.

Until next time, blue skies and tailwinds,
~FlyBoyJon

Aviation, Projects

Plans in Hands

The workshopThursday was a pretty good day. First off, I managed to get down to the workshop and finish cleaning up. I remodeled the shop about a month a go and have been moving everything back in ever since. Because it is such a small space it has taken a lot longer than I had hoped it would to get everything organized and stowed. There are still a few containers that need some sorting, and I need to add a couple more of those small-parts bins, but all-in-all it is a usable space once again.

When I did the remodel I included an internet connection for parts look-ups, ordering, reference materials, and to have some audio visual stuff available. One thing I haven’t gotten around to just yet has been the installation of ventilation fans. It is a really small space and it gets hot in there really fast. Besides, if I am going to use any resins, do any soldering, blah blah blah, it would be a good idea if I had some air-flow.

A package? For me?On Tuesday I placed an order with Aircraft Spruce for some stickers, a patch, and… my set of Volksplane VP-I plans. My wife and I had something going on Thursday night which just happened to be when I was expecting Mr. UPS Man to come by with my package containing the plans. I was hoping that he would come early so I could take the plans with me, but time was growing short and we were about to head out. I was writing a note to authorize my son to accept the package for me when low and behold, who should appear? Mr. UPS Man! Package in hand, we were out the door in a couple of minutes.

My wife and I run a group called Grave Mistake. The group participates in the annual “Thrill The World” world-wide simultaneous Thriller dance event. My wife teaches the Thriller dance and I take care of the audio as well as manage the web and back office stuff for the group. So while she was teaching Thursday’s dance workshop, I was reading; well flipping through. I perused my way through the “VP-I Volksplane Plans and Pilot’s Handbook” and the “Evans Lightplane Designer’s Handbook” before the workshop ended.

VP-I plans and HandbookThe plans are on 8.5″ x 11″ sheets in a comb-bound volume. Everything is there but a lot of it is crowded on to the sheets and doesn’t seem to be organized in what I would consider a logical order. Looking at the plans a little closer now that I am home, I am thinking I need to make some copies and lay everything out so I can look at it all with my Big Picture eyes. I might need to do some blow-up prints too. I will definitely need a couple of working copies to make notes on.

While my wife and I were driving to the dance workshop I was talking with her about possibly building a 1:4 or 1:8 scale model using veneer sheets and pine. At 1:4 scale I might be able to build it from one (1) or two (2) sheets, and two (2) or three (3) pine 2″ x 4″s. Looking at the plans, I’m thinking it might be a really good idea. If nothing else it will be a good way get really familiar with the plans, and if I screw something up it wont cost me hundreds of dollars. Another good thing about building the model is that it will give me a better idea what materials will be needed for jigs, fixtures, and tooling. By building a model I should be able to prevent time and money consuming problems, and I will have a better understanding of the airplane over all. I will also end up with a really cool scale model to boot!

Looks like I have some planning and shop-office stuff to get done. I need to come up with a task list and sub-budget for the model. I think I might need to build a bench-top frame for my RotoZip tool to use it as a router/cutter for the model. I have some 1/4 and 1/2 particle board, some cheap 1/4 plywood, and some Masonite available, and lots miscellaneous hardware. That should get me started. The next two weeks are really full, but I will find some time to get some work done and report back to you.

Until next time, blue skies and tail winds.
~FlyBoyJon

Projects

Workshops

When you are a builder/fixer one of the difficulties of apartment living, or living in a small space in general is finding a place for a workshop. In my case, I have semi-public spaces I can work in, I just can’t leave anything lying out overnight to dry or set. I do have an actual shop space though. It’s about 7.5′ x 8.5′ but how much can you really do with a 65 square foot workshop?

The WorkshopFor all intents and purposes the shop is laid out as follows. The door is in the middle of one of the short sides. From the door, the bench is to the left, it is 8 feet long and 24 inches deep. Under the bench on the left side, closest to the door, is a small compressor, a 5 gallon waste bucket, a 5 gallon dirty rag bucket, a shop stool, and a bench-top drill press. Under the bench on the right side are large tools, mostly bench-top stuff. On top of the bench are 4 small-parts organizers and a 12 drawer tool chest. At the end of the bench is a 6 inch space between the bench and the back wall for storing small materials. There is a 4 foot wide center isle that runs the length of the space. A ladder and a rolling cart are up against the back wall. To the right of the door are two 6 foot tall storage shelves that are 3 feet wide and 18 inches deep each. On the shelve are tools, consumables, supplies, and shop miscellanea, all stowed and containerized. At the far end of the shelves is a rolling tool chest.

The space fills up rather quickly when you have a small shop. For my work needs, the space I have is adequate. For tool repair and small craft, electronic, jewelry, and other hobby projects the space works reasonably well. One of the things I am working on is putting in some ventilation. This is a must for any workshop that you will be sitting down and actually working on stuff. A small shop will heat up really fast without proper air flow, of course there is the removal of hazardous vapors and gases to consider as well. Soldering, working with adhesives, paints, or any other items in a long list of potentially dangerous substances necessitates good ventilation, and not just adequate ventilation.

A major consideration for my shop remodel this year was the new project I have been planning. A project like this normally requires more space, but by building the small sub-assemblies first and storing them until needed in the final assembly, I can complete a large project in a small workshop. The key is to be able to schedule your work around the available space. At least this all works in theory, putting it into practice is always the real test. In the past I have been able to complete a number of large projects with limited space, but this one is going to stretch my scheduling abilities to the max.

What’s the project? Building an airplane. Building an airplane is one of those projects a builder thinks about for a long time before jumping in and actually do it. A lot goes into a project like this. There are a lot of parts I can manufacture and small sub-assemblies that I can build before needing more space. I am prepared to build 80% of the airplane with the space available right now, and I do have some less-than-optimum fall backs in case I am not able to swing a larger space when the time comes. I wouldn’t start a project like this without having things planned out throughly including back-up plans. There has to be some flexibility built into the schedule of any large project. Regular re-evaluation of plans and back-up plans is also a really good idea.

The reason I bring this up is to remind you that you can take on big projects with a small workshop. I know boat builders who use a 10′ x 10′ Tuff-Shed in the back yard for tools and small materials, putting large lumber under a tarp while they build their boat. I’m not talking about a four-man row boat here ether. I know one guy who built a 32 foot sail boat that he had to lift over his house with a crane to get it onto the trailer when he was done. He sold the house and sailed his home-built boat around the world… twice.

Sure, that’s an extreme case, but with careful, detailed planing you can build motorcycles, cars, boats, airplanes, or just about anything you want in a small workshop. All you have to do is put your mind to it, and let your dreams take flight.

Aviation, Projects

Flyboys

One of my favorite movies is Flyboys (2006) by Tony Bill. Some of my favorite scenes in the movie are the ones where the pilots gather in the Ready Room, aka the pub. They celebrate their successes and remember their losses in a way that many non-pilots can’t truly understand.

Viper (Tom Skarret’s character in Top Gun) said it best: “A good pilot is compelled to always evaluate what’s happened, so he can apply what he has learned.” From outside the aviation world it may seem as though pilots are obsessed with death and accidents, and very callus about these situations. In one sense we are; from the day we start flight training, we are constantly exposed to aviation accident reports. Like most pilots with a few hundred hours, I know pilots who have died in an airplane, or been involved in a reportable event. More often than not the cause of the crash or event was Pilot Error.

Pilot Error seems to be the NTSB’s favorite phrase in accident reports, it appears in almost all of them. Sadly, it’s a legitimate statement in those reports far more often than not. This is why we read the reports; if that guy did it, I might do it, too. I have to pay attention to that. A well educated aviator might push the limits, but they know exactly where those limits are and how they affect the situation.

I am still in the planing phase of my aircraft build project but I am thinking about the Flight Testing phase. Before I can develop a Flight Test Program I need to have a good understanding of the Volksplane’s flight characteristics from other builders and pilots. I plan on asking a lot of questions on the boards and lists but if I want to ask intelligent and directed questions I need to know what to ask. My first stop in researching flight characteristics is the NTSB Aviation Accident Database.

According to the FAA’s Registration Database there are approximately 512 Volksplane variants currently registered in the U.S. Since the plans for the aircraft were made available in 1969 there have been 45 Volksplane accidents; 17 none/minor injury, 19 serious injury, 9 fatalities, they break down by decade as follows.

  2000 1990 1980 1970
Fatal 1 2 2 4
Non Fatal 2 4 9 21

Not all data fields add up numerically, mainly because the NTSB’s data in not always complete so keep that in mind before you pull out that calculator. In the case of our accident pilots only 44 were reported with a certificate status, 38 had a pilot certificate and 5 did not. I broke down pilot age into three groups. The under 30 set included 8 pilots, in the 31-49 group we found our majority with 22, the over 50 group claimed 12.

Let’s take a look at total pilot in command (PIC) hours and hours in type.

  ≤50 ≤100 ≤250 ≤500 ≥500
TTL Hrs 1 4 11 8 19
 
  ≤5 ≤25 ≤50 ≥50  
In Type 24 9 4 5  

Yes, that’s right. A couple of our intrepid certificateless pilots had reported over 100 hours.

A majority of the reports involved a loss of control in the air, 25, with several on the ground, 16. One (1) incident was due to weather and one (1) was due to a propeller failure.

18 incidences involved some kind of power failure, 8 from unknown causes, 10 from fuel issues, 5 of which were caused by fuel starvation, 2 of those from just old fashioned running out of gas.

There were 15 incidents of builders not installing parts, installing parts wrong, ground testing with known problems that ended up as unintentional in-flight problems.

Most of the mechanical stuff and incidents of pilots without certificates occurred in the 70s. The disturbing part is pilots with low total times and no time in type are more common in recent decades. It seems as though we have gotten better in the building part but more impatient about getting the bird in the air.

My conclusions from this basic data are that as a builder it is of the utmost importance to take your time and check everything thrice. As a test pilot, take your time, inspect everything, understand the flight characteristics of the aircraft, expected and otherwise, be current, in type if possible, and take each step of the test flight program with absolute attention to detail. Considering every flight as a test flight up to 100 hours is not a bad idea ether. There was only one incident over 100 hours. Attention to detail and planning could have prevented all of the 45 incidents with possible exceptions for 2 of them.

Did I learn anything I didn’t know? No. Did taking the time to do the research make me think a bit more about how to prevent failures and what might go wrong? You betcha! Will my standards in the build process be better than if I had not taken the time to do this research? Probably. How about flight testing standards? Yeah. I think I will be less ambitious with the test flight schedule.

Until next time, blue skies and tail winds,
~FlyBoyJon

BTW Just in case you are wondering, I have been known as FlyBoyJon since 2003.

Aviation, Projects

Thank you Mr. UPS Man

Greetings Intrepid Aeronauts!

Less than an hour ago our regular UPS delivery guy came by with a package for lill’-o’ll-me. It was the Amateur-Built Certification Kit (ABC Kit) I ordered last week from EAA. This makes my second delivery on the project this week. I feel like I am off to a good start.

Much of this week has been getting myself organized and geared up. I like to document projects early on in the planning planing phase, so one of the first things I did on Monday was order log books for the project: airframe, engine, and propeller from Wicks. I wanted to have them well in advance so I could take a look at what all was included in the log books. Also because I should have a log book available once the engine and propeller are sourced. Now I know what information is of particular importance. They got here on Thursday along with a shiny new Wicks catalog, which I looked over cover-to-cover.

To prove what an AvDork I am, I used the FAA’s online N-Number reservation page and reserved one. I don’t want to post the number until I get a confirmation from the FAA (which will be 1 to 3 weeks), but you can be sure I will post is as soon as that happens.

A bunch of time this week has been spent searching out information on Volksplanes and amateur-built aircraft construction in general. I download a lot of ACs, manuals, and other documents from the FAA, so I needed to check and make sure I had current releases of them. Good thing I checked too. The last time I downloaded AC 20-27 Certification and Operation of Amateur-Built Aircraft it was 20-27F, the current edition is AC 20-27G. Since this is one of the ACs on the list of stuff the FAA wants you to know, I read the new version cover-to-cover finishing it Tuesday night a little after midnight.

Another AC I am re-reading is AC 90-89A Amateur-Built Aircraft and Ultralight Flight Testing Manual. I hadn’t read this one in over a year so I picked it up and started again. Tonight though, I am going to read through the EAA ABC Kit.

The next purchase on the list is the Plans Set from Evans Aircraft. I’m not sure how soon, but I am hoping to order it before the end of the month.

I think I’m going to call this a short post tonight, I just wanted to bring the log up-to-date.

Until then, blue skies and tail-winds,
~FlyBoyJon

Aviation, Projects

Let The Project Begin!

Today is an important day for me. Today I am actually starting my first aircraft build project. Now I know you are bouncing in your seats “Show me the airplane, show me the airplane” but that’s going to be a while. First off I have to get this huge bolder rolling.

Building an airplane has been on my list of things to do for a long time. One of the things you have to do when you build an airplane is keep a Builders Log showing all of the processes you have gone through in completing your project. The FAA uses the Builders Log, in part, to demonstrate compliance with the federal regulations that say a builder must complete a “majority” of the work. This is known as the 51% Rule in Amateur-Built aviation circles.

A quick terminology note here for the non-initiated: Amateur-Built, Home-Built, and Experimental are all terms used for aircraft that are built by individuals or groups that do not build airplanes as a manufacturer. I will be using all three terms interchangeably throughout this post, and the entire blog for that matter.

There are a number of Builders Logs on line and the better ones cover not just the technical details of the building process but the spool-up of the project, the planning phase. This is an area I want to spend more time on than most other builders. There will of course be lots of coverage of the actual building process and after the airplane is built I will extensively cover the flight testing phase as well. My goal for this blog is to cover the entire project from start to finish.

In the beginning…

I have been searching for the right airplane to build for a couple of years now. I really liked the idea of building a WWI bi-plane like the Neuport 17/24 the airplane flown by the famous Lafayette Escadrille. I also considered the Curtis JN-4D or Jenny as they are more commonly known. Both projects would be tons of fun but the cost would be prohibitive and they would take at least 3 years to build, in part because the engines are very expensive and hard to come by.

As you might have guessed, the engine of an experimental aircraft is usually the most expensive component part. This became one of the deciding factors for me in choosing what airplane to build. Probably the least expensive engine to use in an airplane that has a good history for conversion as an aircraft engine is the Volkswagen Type 1. Pretty much any VW engine can be converted for aviation use. There are a few companies that make their living doing VW conversions. One company that does this is AeroConversions.

I found out about AeroConversions when I was looking at the Sonex as project airplane. After looking at the WWI fighters and deciding that the cost would be to high, I looked for the least expensive option I could find in a kit-built. A kit-built is just what it sounds like, you buy a kit, and build it. I liked Sonex for several reasons. One, the kit comes with the engine. That is not usually the case; the kit usually includes just about everything except the instruments and avionics but they do include a budget for them in their cost estimate, and the best part was the realistic cost for a completed basic Sonex comes out to about $25,000. Like most kit manufacturers, Sonex has a collection of sub-kits you can buy at various stages to help spread the cost out over time, but you still end up with a couple of big chunks-O-change having to be dropped all at once, like the engine kit coming in a bit over six grand.

My mind started twirling with ways to build the funds through sponsorships and the like, which I am still open to hint hint but it was just not coming about. I started down that road about a year before the economy turned to mud which put a big damper on the whole thing. Now, here I am, many moons down the road and still no air-O-plane. My 2010 edition of the Aircraft Spruce catalog showed up and as I was thumbing through it, I looked at a plans-built that I have looked at many times before, but this time I saw them with different eyes. Plans-built is like a kit-built only no parts, just the plans, you have to figure out what you need and then go get it. Plans-built is the least expensive way to build an airplane, but it usually takes considerably longer to get in the air.

The VP

The VolksPlane is not a pretty airplane, it is a very simple airplane. It is a wood and fabric built airplane that has proven to be quite sturdy. Here are some of the basics about the plane. With a 2000cc VW it will fly at a slow 75-95 mph with a maximum speed around 110 and a Do Not Exceed speed of 120. It is designed for the Utility category which means it can handle a few Gs. Here is where it becomes a real winner, it burns about 3 gallons of fuel per hour, unlike a Cessna 172 that burns about 11 to 15. Last but certainly not least… it has a realistic build budget of $12,300.

Now I know I can do better than $12,300. I beefed up my budget in all directions so this is actually a very conservative number. The only place it could get out of hand is with the… you guessed it, the engine. I have heard some reports of builds of the VP in the “less than $5,000” range. I am going to stick to my guns on this one at $12,300. This gives me a generous tool budget, includes sales tax of 10%, an “extras” budget, a shipping and handling budget, and a 10% of total cost PCO budget. Knock on wood… I think I’m covered.

This budgeting is based on a collection of sub-kits from Aircraft Spruce, most of which are $500 or less, the most expensivesub-kit is the highest cost landing gear option at a little less than $1,200, the least expensive option for landing gear is $700, so I think I have a good amount of wiggle room built-in to the budget. I can also look at buying materials in smaller assembly-based chunks from local suppliers.

What’s next?

Now I need to start the project with the Planning Phase.

  • Contact FAA for an “Amature Builders” information packet.
  • Begin Builders log This blog!
  • Purchase EAA Builders kit
  • Purchase Volksplane plans
  • Purchase Log books: Airframe, Engine, Prop
  • Purchase builders reference books There are several books that are very useful to have, I’ll list them later. Most of these can wait until I am ready to purchase materials
  • Request an N-Number send in “Affidavit of Ownership for Amateur-Built Aircraft” Form 8050-88. This is the identification number on the tail of the airplane. It’s official!!!!
  • Register the airplane After the N-Number confirmation comes by mail, send in “Aircraft Registration Application” Form 8050-1
  • Develop a build schedule including: **
    1. Construction Schedule
    2. Budget Schedule
  • Begin building

**So why is this after a bunch of other stuff? Good question. I already have a preliminary budget and a preliminary work schedule but you can’t really get down to solid numbers until you have had some time to go over the plans and break things down into sub assemblies with materials lists and all of that persnickety stuff. Because I am working on pocket-change-budget I have to take the extra time to schedule little bits of work at a time efficiently so I’m not sitting around on my butt not working on my airplane.

In conclusion

So there it is. I am building an airplane. It would be nice to fly to AirVenture Oshkosh 2011, but that is unlikely; 2012 however is doable with this project. We shall see.

Now I am off to call the FAA, item one… check.

Projects, Writing

Oops.

Holy Cow!

I didn’t realize how long it had been since I posted on the blog. You may remember I am producing a local live event project. Nothing huge, but for some reason it has been sucking my time away in unbelievable volumes. To get this project off the ground I had to build a support infrastructure before building the actual “group” that is doing the event. The basics are not difficult, I do this kind of stuff all the time, the time killer is having at least one workshop every week and all of the back office stuff going on as well.

Needless to say, I’ve been busy. Oh, and did I mention this is a no money gig. Don’t get me wrong, I love every minute of it. I have been doing tons of web development stuff that will carry over to other projects and a fair amount of media work too. The only real problem has been pulling myself away from the gig to do my “day job” stuff, as I said no $$$ for the gig.

Here is the really funny part. While doing all of the gig work, and the “day job”, I have been getting tons of creative ideas that I have been scrambling to get written down. Not that I have had any time for writing mind you.

With any luck things will begin to normalize before the end of the month. The event is on the 24th and the editing shouldn’t take too long. The live event is only 6 minutes, with that and all of the before material I have been compiling I am hoping to have a solid 30 minute short Doc when all is said and done. At least when I get to post, it will all be on my own time and not a schedule so I can take a breather when needed. For now, time is fleeting.

Until next time,
~FlyBoyJon

Adventures, Development, Ethics, Health & Fitness, Projects, Ramblings

Where is he going with this?

Taking NoteA fair question, indeed.

When I started this iteration of the website as a blog in March of 2008, the idea was to use it as a personal site only. Later it migrated to an idea of a purely commercial/organizational site, and has morphed into several variations since. In the most recent morph, I closed down a couple of other sites, redirected them to this site and cross-posted the entries from those sites here. Sounds like a mess, doesn’t it? I spent a lot of time on this site planing and preparing for this grand Aviation Adventure program (which I have not given up on, by the way) that was to become my primary focus professionally. Due to many circumstances, that plan has not born any fruit.

This post is a “clear the air” article, more for me than anyone else, though it may contain tidbits useful to others. I wanted to put the new plans out there for the universe to see, and to be a personal motivator and reference point.

Shortcomings in personality have much to do with the lack of forward motion on several plans for the site. I am a born puppeteer leader. I lead from the wings, not on stage. Getting things done is much easier for me if there is a “face man” to motivate the masses and sell the product. I am a skilled sales person and I do have the interpersonal skills to get the job done, I just don’t like to be the face man. I can do the jobs of a good sized team in the background; just don’t throw me out on stage and things will work out fine. This is my biggest hurdle in getting projects moving forward. This is also a contributing factor in this most recent change of direction.

The last few posts have been about me, not just in the subject sense but in the personal sense, and this is part of the new direction I am moving to with this site. It is a change of perspective and attitude, to view the adventures more the way I see them. The plan then is to do the adventure stuff but approach it from the back stage perspective. Go through the planing, plotting and set up, then into the training phase, on to the execution, and the grand finale, the post production documentation phase. With this perspective I will be able to do and share all of the things I love, the planing, training, adventure, and production.

As much as I would love to start building that Nieuport right away, that just aint gonna happen. As a kid I was never in shape; I was an active person, I was just an active fat person. Over the years, I have abused my body with long hours, little sleep and lots of burst activities. The kinds of things that put high strain on the body. Now, as I reach for middle age, I realize there are a lot of things I miss doing that are adventures in and of themselves. I want to get myself in better physical condition to do some of the more infrequently done adventures. One thing I have wanted to do most of my life is fly around the world as pilot in command (PIC). To do that I need to be in good physical condition, certainly better condition than I am now.

So, this is where the adventures begin. I am embarking on a physical fitness program, still in development, that is my first adventure. This change in direction began with the 5k my wife and I participated in a week ago, and moved forward in the preparation of yesterdays article on shoes. Last night I plotted out a 5k through my neighborhood and that is my new training ground, until I bump it up to a 10k.

This is the beginning of my basic fitness program. As I put together more of a program I will put up a Basic Fitness page to elaborate on what I am doing in that arena. At present, the first Adventure, with a capital A, will most likely be the Skyline To The Sea trail, from Skyline down into Big Basin State Park. As soon as I get more on the planing of that trip I will start the Adventure page. As I accumulate more Adventures, I will sort them out a bit, but the blog will contain posts about all.

Monetization is where the biggest change in plan for the site takes place. I had always planned for the site to be monetized, it was originally intended to be very early in the game. Now that element is taking a back seat. I plan on acquiring sponsors and selling advertising at some point. For now that is an incidental, not a driving factor. This is a huge shift in the sites initial concept. Where it was originally money driven, it is now a personal thing. Don’t get me wrong, I will be pimping the site in short order, it just wont be the driving force. I think that this change in attitude about the site will help to over come my personal obstacles about being the face man.