Category Archives: Volunteer Examiner

The Move Is Done

Well, sort of…

We are here in Klamath Falls, Oregon now. We started the move July 1st and I was making runs all July. The old place was officially vacated July 31st. August was the slow unpacking of boxes and the beginning of several furniture building projects. I have built 6 bookcases; 2 of them 40 inches tall, the other 4, 70 inches tall.

I still have a number of things to build like the DVD cabinets that will hold our 1000ish movies and TV shows. I also have a lot of storage containers to build, think apothecaries drawers. Lot’s and lot’s of them.

You can see why I haven’t posted in a while. I have made some upgrades to the shack, well the mobile, the shack is looking rather minuscule right now.

I have absolutely no bench space for shop stuff or electronics. The station is occupying a puny 1 sq.ft. space across 2 shelves, but, I actually have an HF antenna outside! The MFJ-1982LP endfed is up. The feed point is about 15 feet up on the mast my 2m roll-up J-Pole is attached to and the rest of the antenna is supported by 2 31 foot Jackite poles and 20 feet up into the Ponderosa Pine in our front yard.

So far 80 and 40 meters have been kind. The net controls have had to work me pretty hard, but I have been getting through. I have been heard as far away as Victoria BC Canada, La Jolla California, Somewhere in Wyoming, Utah, and Nevada. Not bad for 5 watts.

The power on the base, my Yaesu FT-817ND, needs a boost now that I am putting together a local NTS Net. I need to make the Local to Section hop on HF more reliably and not make control work so hard. The local net will be on one of the club repeaters.

I have also moved forward by getting involved with a local active club, the Klamath Basin Amateur Radio Association. I have already done two events and a VE session with the club since we got up here. Also in the mix is getting started with the Klamath County CERT program.  There is some early work on getting an ARES/RACES group together. All kinds of fun going on.

Once we got up here I started work on the mobile. The Baofeng UV-5RE+ was not cutting it on 2 meters. I upgraded from 5 watts with a crappy little antenna to 25 watts with a QYT KT-9800D dual band mobile radio and an ANLI DC-124H TriBand antenna.  Much better performance. Also in the mobile, I installed a Uniden BEARCAT 980SSB Single Sideband CB and a Midland MXT400 GMRS radio. There is hardly any CB traffic up here, but surprisingly, there is quite a bit of GMRS traffic.

For a 2 meter base, I have been using one of the 5 watt handhelds attached to the homebrew 2 meter twin-lead J-Pole I built a while back. Now that I am getting hooked up with CERT, I think I should pull the J-Pole out of the PVC and use it as a portable roll-up. I also need a little more juice for poor weather conditions so a 2 meter base upgrade was in order. Another QYT KT-9800D mobile radio and a Diamond X50A dual-band base antenna should work nicely for VHF/UHF. Those will be incorporated into the station by the end of the week.

As for the HF side of the station… I need to poke around for something around 100 watts, which will require an antenna upgrade too. The MFJ-1982LP is only rated to 30 watts. As long as I keep the power down I should be able to use it for a while. That will still give me a 6 db power gain over the 5 watts I am pushing now. Anything should help. The section nets are on 80 and 40 meters so I will need an antenna that covers at least 10-80 meters. 100 watts should be more than enough for my needs.

Oh, one other thing, I finally got my Skywarn ID number, now I need to find a net for Skywarn. I haven’t found anything in southeastern Oregon yet. I’ll keep looking.

Anyway, that’s the status update for now. Look for an NTS page to be added to the site soon.

73,
~Jon KK6GXG

In the works

Mid May, two months since the last post. What have I been up to?

Of course, I have been doing the regular VE sessions, but other than that… Packing. Lots of packing. We have been planning on relocating for several years now but time has finally arrived that we are moving forward pun intended.

We don’t want to move in the winter and we don’t want to wait another year so… we are gearing up for a move sometime soon. One of the best ways to get ready is to start filtering through all of the stuff that has accumulated over the last 21 years we have been here.

As we shed truck-loads of stuff we just don’t need to Savers and Goodwill, we have been packing up the things we can do without for a few months. Having a bunch of other stuff on the brain, the ham shack, or most of it anyway, was one of the first things to get boxed. So for now, no electronics lab. Nearly all of my test equipment is boxed up. We are up to 40 boxes, filtering and packing more every day.

Lest you think I’m ignoring radio, I have been gearing up to be more active in ARES, RACES, NTS, Skywarn, and CERT by taking a lot of FEMA/DHS classes that are prereqs for various organizations. I am also scheduled to take a BLS class in two weeks which includes CPR, AES and more. I want to add a variety of EmComm instruction to my growing list of classes offered in the near future so I am ticking down the long list of prereqs and associated training.

In a somewhat side related area, I also recently acquired my Remote Pilot certificate with Small Unmanned Aircraft Systems rating. Basically, a commercial UAV pilots license in addition to my commercial airplane pilot certificate. This will allow me to do aerial photography and inspections for pay with a UAV/UAS. And what might I be taking pictures of and inspecting, radio towers???? Possibly.

Anywho, I wanted to post an update so you didn’t think I had abandon radio or the site. I just don’t have a lot to post about other than classes and ratings. I will be doing a mobile install of my FT-817 with a quad-band antenna sometime soon so I will plan on posting about that soon. I may also be posting some short subject videos in the near future as well.

Til next time, 73
~Jon KK6GXG

Another successful class

Just a short post today. This weekend I held another Technician license class, and it went great!

Another small and diverse class, best of all everyone passed with flying colors. I really do have a lot of fun doing these; by Sunday evening I am wired, completely exhausted, and absolutely fried mentally, I love every minute of it.

Two more classes in April, one Technician and one General, and that ends my currently posted calendar. I may be adding more classes after a visit from out of state family. We shall see.

In other radio news, I have been busy building dipole antennas. I am up to a 6 meter, 10 meter, and a 20 meter. I will definitely be adding a 40 meter to that soon. I have been looking for steel materials suppliers for 1/4 λ verticals. I want to build individual 70cm, 2m, 6m, and 10m. I think I may have found one. If so I will be working on a vertical array in the near future.

After I get all of the bands covered with basics, I want to start working on directional beams, at least for the main bands. I will wait for a while on these. Down the road, I also want to build some of the more exotic antenna varieties, including multi-bands, and arrays.

Antennas are usually relatively quick builds, which is great. Radio builds tend to take a bit longer. I have a couple of radio projects in limbo at the moment. Once I get some cabling projects finished for digital modes, I will also be getting back to the radio projects.

The build that seems to be taking forever is the Beach 40 project. This one needs to get back on the priority list. I should be able to get back to it this fall.

In VE news… This weekend will be my 54th VE session with the Silicon Valley VE group, something else I truly enjoy doing.

That’s it for now.

73,
~Jon KK6GXG 

Where do we go from hear

ARRL Registered Instructor

Good Technician class this last weekend. Small, but a lot of fun. The best part of all was the 100% pass rate for the exam.

Okay, now the confession, it was a two student class. Still, I am happy about the two newly minted hams.

Last weekend was a VE weekend, so I was examining not teaching. As is the norm, when we are not grading exams, we jack-jaw. Mostly about radio operations, sometimes the conversation leans technical. In recent months we have been haveing

In recent months the chatter has been about the ham population. Two specific areas have topped the conversations. The first is centered on the retention of Volunteer Examiners and engaging the VE community.  The second topic of conversation has to do with a special anniversary coming up in a few days.

February 23, 2007,  was the date the FCC dropped the CW (Morse code) requirements from all amateur radio licenses. Back in February 1991, the FCC dropped the code requirement for the Technician class license but it was the 2007 removal of code that made it upgrading a no-code Tech possible.

There was a boost to the number of new hams in the early 90s, but the number of new hams, and upgrades, since 2007 has been record breaking.  So this is all great news for hams right?

Well, maybe. The truth is, there is no telling what’s going to happen. Part of what makes this an interesting subject is that we don’t know why all these new hams have been drawn to amateur radio.

There are a number of possibilities, some centered around the huge and ever-growing population of DIYers and Makers, many of whom show interest in RF, at least on some level. There are the growing number of drone enthusiasts; some need a ham license to control the aircraft itself, others are looking for telemetry, and/or looking at RF video feeds.

What does someone’s reason for becoming a ham have to do with anything? It has to do with retention. Ham licenses are valid for ten years. That’s a long time. Someone who is deeply invested in the hobby is more likely to renew their license. Someone who is involved at a more casual level is less invested and may not feel the need to renew.

Here we are. It’s now ten years later and the first upgrades without a CW requirement are beginning to expire. The big question is will they renew.

My hope, of course, is that the attrition rate will not grow at the same pace as the influx of new hams over the last ten years. Only time will tell.

New Classes Posted

Welcome to 2017!

ARRL-VEC Volunteer Examiner

Not to put too fine a point on it, 2016 had a few issues. Too many beloved performers became silent keys, and more than a few other things that will affect us all went a bit sideways. I’m not even going to get started on politics.

To start the year off on a positive note I worked a VE session in the morning January 7th and spent the rest of the day putting together a new class schedule for Technician and General classes licenses and getting started with the promotion work, posting classes and prepping presentations.

Registered W5YI Instructor

I have six classes coming up, 4 Tech and 2 General January through April. All of them are 2-day weekend classes. This time around I am using the W5YI books by  Gordon West instead of the ARRL books. My main motivation to switch books is Gordo’s reorganizing of the FCC questions into a more logical order.

While the change will save time in class, I now have to tweak a lot of slides. There’ll be no time savings on the prep side this go, but I am optimistic that the reorg will make things a lot smoother in class.

ARRL Registered Instructor

If you, or someone you know, is interested in getting their ham radio license or upgrading from Tech to General and they are local to San Jose, please pass along a link to my site. Classes are listed here.

All of the classes have been posted to both the W5YI and ARRL class listings. As I write this, they are the only classes listed in the south Bay Area. The closest classes on ARRL’s list are San Francisco and Sacramento. There are no classes listed for the area on W5YI. They won’t show up until Monday or Tuesday (2/9-10) because all class postings need to be approved by a human.

I am hoping to greatly expand my teaching and hosting exam sessions later this year. All things in their time.

73,
~Jon KK6GXG

Happy Holidays

Happy Holidays from KK6GXG!

It’s been a long year. Some plans played out, others didn’t. In the end, the things that did play out were long time goals. Those that didn’t pan out where short term and are still in the mix for future completion.

On the plus side, I did manage to get a bunch of VE sessions into the schedule this year. 27 so far with one more next Saturday for a year total of 28 sessions. That makes a grand total of 46 since I started as a VE.

Another plus was finally building a crystal set. It’s one of those things lots of people build as kids and most builder hams have done them as well. I hadn’t until now. It worked out well and I could hear several stations. In the future, I plan on building different variations and working on fine tuning them.

2017 promises to be an interesting year filled with many new builds, completion of some projects, and a lot of operating.

In the meantime…

Happy Holidays to All

~Jon KK6GXG

 

July? Has it really been that long?

Wow, yes it has in fact been that long.

20151104_161606From a building stand point… nothing new has been going on. I am still working on the Beach 40 and the Bitx 20. The Beach 40 still needs the audio section rebuilt and the Bitx20 needs some troubleshooting . I don’t have the facilities to put up a 20 or 40 meter antenna and since both radios are QRP(p), a good antenna is vital to making any contacts.

20151121_072647From an operators perspective… ya, nothing going on there ether. I need to pull down my Frankenstein/Hill Billy mast because we are having our building painted soon. I have plans for a simpler replacement that should work out fine. I’ll post about that if and or when that happens.

From an experimenters view point…  I have been kind of busy lately. Many of the newer radio projects I have been looking at use micro-controllers and embedded Linux systems. All of which I am totally fine with. There are so many other applications besides radio that I can employ these technologies. The only impediment is getting some play time in with these technologies and getting familiar with there capabilities, use, and programming.

arduinoEarlier this year I picked up some Arduino hardware. I haven’t had much time to work with it yet as the Day Job has been keeping me hopping as well as a lot of stuff in the personal life, nothing bad, just a lot of changes and preparations.

Many projects are done with the Arduino and various shields. Some require a little more direction in the form of an embedded system with a true OS. Enter Raspberry Pi and Raspbian.

rpi3bLast week I added a RPi 3B to the hardware pile and began working with it. Along with the Pi I picked up a copy of Exploring Raspberry Pi: Interfacing to the real world with embedded Linux From Wiley written by Derek Molloy.

Linux doesn’t worry me at all. Many moons ago I was a Solaris 7/8 admin as well as a RedHat 7 admin. The problem is that well over a decade has gone by since I actively worked on those systems. I have been in a Windows only environment for so long my Unix brain has turned to mush. So now I’m re-learning the Unix command line and re-acquainting myself with the Linux directory structure along with some all new unique elements of embedded systems and the Raspbian OS in particular.

With all of the projects piling up and now adding a lot of general computer stuff to the pile, Arduino Sketches, Python, C/C++, and picking up where I left off with Perl, it almost feels like I should go back to school and get credit for all of this work. I could pick up a CS degree with everything on my “tech to learn” plate right now. Add in all of the projects and an engineering degree (EE or ME) isn’t far behind. Thoughts for another time.

Radio specific plans are to read and build along with Crystal Sets to Sideband by Frank W. Harris W0IYE, and then get back to Experimental Methods in RF Design and do the same. I don’t expect to do a lot of operating other than 2 meter until we have the facilities to put up a real antenna, and there is no solid timeline for that.

Life outside radio has taken all of my time lately and I am just now slowly getting back to things. Most of it is general electronics/computer experimentation and adding to the knowledge pool right now.

So in conclusion, no I haven’t been busy, I’ve been too busy.

:-/

hamverseryP.S. Today’s post is brought to you by Hamversary. On this day in 2013 I received my license grant about a week after I walked into the Saratoga Fire Station a non-ham. Since then I have worked my way up to Extra Class, begun teaching license preparation classes to prospective hams, and I have been a Volunteer Examiner for 42 exam sessions, most of them at the Saratoga Fire Station.

I have learned so much in so many ways in this short period of time. Thank you Amateur Radio.

73,
~Jon KK6GXG 

Ham Class: One Down, Another On Deck

Ham Class logoThe July 8th class went of rather well. I am happy to report that we introduced 5 new hams to the community!

The class went very well and I had a few requests to add a General class to the future class schedule. I’m still working on prepping for that General class, but I do have another Technician class lined up to begin July 27th and running every Wednesday evening until August 31st.

No guarantees, but I am going to try to get the General class on the books before the end of August.

I have been working on the Get Your License pages today. They are finally up and functioning. There is information on how to get a license and what to expect on the exam along with links to other resources.

License Exams
License Classes
Technician Class

Until next time, 73,
~Jon KK6GXG

Back from Maker Faire Bay Area 2016

MF16_BA_180x150Just got home from Maker Faire SF Bay Area. Pulled a double shift at the Ham Exam booth. 8am to 6pm and I only managed about 20 minutes away from the booth and about 15 minutes off my feet. This is not a complaint, I’m just saying…

I had a great time. We had 14 candidates throughout the day, so we did get a lot of STS time (Shoot-the-stuff) but we managed to stay busy most of the time.

Lots of chatting about VE stuff in the morning along with a generous helping of radio stuff mixed in. Mostly radio stuff in the afternoon. I even had a visit from a friend scoping out the faire.

ARRL

That’s all for the moment, but I do have a project coming up this week, a TNC to connect a radio to a computer for use with digital modes. More to come…

73,
~Jon KK6GXG