Antennas & More

20150507_192446Today was a good antenna day. I finally got the PVC cover on the 40 meter helically-wound antenna I started back in April. I have been using the antenna without the cover as a test antenna next to the bench but it’s time to get it up on the roofline for some actual use.

By “actual use” I am referring to the Beach 40 project that is back in motion now that I have a VXO that pulls more than 1.8 kHz of selectivity. Yay 148 kHz selectivity! Now all I need to do is get the Tx/Rx switching working for the transceiver to be operational.

20140430_131323Another antenna project completed today is the 2 meter twin-lead J-Pole. This one was also waiting for a PVC cover so it could be mounted on a pole. The original design was intended as a portable antenna but the twin-lead J-Pole on any frequency above 50 MHz lends itself well to mounted vertical use, it just needs a housing to keep it in the vertical position.

This little antenna works really well. On numerous occasions I have been unable to ping the local repeaters with my HT with the stock or aftermarket antennas for handhelds. If I attach the twin-lead J-Pole I can actually get out and participate in the nets. With this antenna up in the air at roofline I should have no problems working any of the local repeaters including the packet and Winlink towers.

Speaking of which, I want to get into digital modes once I get the antennas up in the air. I’m not quite up to building a TNC from scratch so I need to save up a hundred and fifty bucks to get digital rolling. Soon…

20151111_145644The other antenna project today was a new-start. When the 2 and 40 meter antennas go up I also plan on attaching a 70 cm half-wave vertical with counterpoise. This one is an experiment. I originally planned on building a 70 cm full-wave twin-lead J-Pole, and I likely still will, but I wanted to see if I could make a vertical with counterpoise that works well. I may even mod this one into a full-wave vertical with half-wave counterpoise radials. Dunno. Like I said, this is an experiment.

Another near-term antenna project, as-of-yet not started, is an aviation band twin-lead J-Pole set up like the 2 meter one. Being a pilot and mechanic, at some point I would like to have either a hangar at a local airport or a small strip at home to work on restorations, so it would make sense to have an AvBand radio in the shop. I have a Vertex Standard (Yaesu) HT for aviation VHF, it just needs an external antenna. I also have a few old radios salvaged from aircraft that would never make it back into an aircraft, but may be suitable for base station operations.

I have a number of other antenna experiment/projects in various configurations, in particular 2 m and 70 cm yagi and/or helical beam antennas suitable for satellite and moon bounce communication. But these are for the future. I also want to build some highly directional antennas for radio orienteering and high-gain narrow-beam antennas for really low power communications.

As for the “More” in the title, once I finish the 40 m transceiver I plan on building a 20 and 10 meter versions. I also have an idea for simple low power beacon transmitters I want to play with. I also want to get set up for QRSS, WSPR, and APRS.

Lots to do. One step at a time.

Till next time, 73,